- 15,00 BTU Air Conditioner w/ Heat Strip
- Frame out for Air
- Awning Deluxe – 7′ x 12′ (8500 Series)
- Extra length to Awning (8500 Series)
- Center Rafter – For awnings over 15′
- To install aluminum bracket and rail for awning (so customer can install awning)
- 5200 Ib. Tandem axle in place of 3500 Ib. Tandem axle
- 6000 Ib. Tandem axle in place of 3500 Ib. Tandem axle
- 7000 Ib. Tandem axle in place of 6000 Ib. Tandem axle
- 8000 Ib. Tandem axle in place of 7000 Ib. Tandem axle
- 6000 lb or 7000 Ib. Axle w/ I0-ply Tires
- 8000 lb Axle w/ 10-ply Tires
- 8000 Ib. Axle w/ 16-ply Tires
- Butt or breast bars (per pair)
- One Piece Spring Loaded Butt or Breast Bar at back to keep horse in w/ No back tack
- One Piece Chain w/ plastic cover and hooks
- For Each Additional Adjustment (Butt or Breast Bar)
- Ceiling insulated and paneled (figure long wall and 8″ for gooseneck)
- Walls insulated and paneled (Deluxe models – add 8′ for gooseneck) NOTE: One a “970” model figure 8′ on the slant wall, plus long wall and 8′ for gooseneck
- Extra blanket rack
- Lunadome
- 12 Volt lunadome
- Shelf for Hat Box
- Clothes Rod w/shelf
- Boot Box
- Divider w/ rubber mats hanging underneath (per divider)
- 16″ middle divider w/ butt bar, breast bar and front post
- Complete full divider or Two piece divider (need height of divider off floor)
- Extra aluminum 16″ divider (slant or straight)
- To add bottom to aluminum 16″ divider (need height of divider off floor)
- To make divider to go both ways (per divider)
- To make divider to be able to move to different locations (per location)
- To make divider heavy duty
- Slant pipe divider (when customer deletes slant wall)
- (Stock Trailer): T Divider w/ padded butt bar
- (Stock Trailer): Tubing divider w/ butt and breast bar and front post
- (Stock Trailer): Shoulder guard on T Divider or Tubing Divider
- Dog Boxes
- Walk-thru Door from dressing room to tack room or to horses area (need to know which way to swing) **Specify height and front or back of feed trough if center walk thru**
- Center tack door (28″ or 31″)
- Gore made door w/ sliding window
- Full Walk thru escape door
- Small escape door (like the ones that go over top of fender)
- Dressing room door w/ screen (28″ wide)
- Cam lock on door (per cam lock)
- One piece back gate in place of regular door
- Saddle doors
- 40/60 back doors (extra)
- Doors in place of breast or butt bar
- (2) Stud Doors “Like our 2 +1”
- Combination back gate in place of regular door (Reinforce back)
- Two full length back doors w/ window and cam latch in place of Combination Gate – No charge
- Escape Hatch
- Equalizer brackets on tongue
- 12 Volt fan in horse stall
- To move center gate to different locations (per location)
- Drop down gate going into gooseneck
- To make combination gate one piece – No charge
- Center stock trailer gate – 4′ solid – w/ bars above it – total height of approx. 5′ *No rubber on side
- Stud divider gate w/ rubber kick plates (approx. 1″ off floor) (Solid to height of top rail)
- Diamond plate to go around front of trailer
- Diamond plate on fenders (this includes both fenders)
- To add 6″ extra height (figure total length of trailer including gooseneck)
- Bucket hooks (flip down)
- Inside or outside ties
- Bridle hooks
- 12V Electric jack for pull-type trailers in place of regular jack w/ battery and charger
- Hydraulic Jack for Bumper Pull Trailer
- Hydraulic – One single 12V Hydraulic jack
- Hydraulic – One pair 12V Hydraulic jacks
- Extra length on a 6′ wide trailer For 7’6″ tall
- Extra length on a 79″ wide trailer For 7’6″ tall
- Extra length on a 7′ wide trailer For 7’6″ tall
- Inside or outside light
- Lights on runner board
- Running light on top of trailer
- Spot Light
- Extra stop and turn light mounted on side fin
- Old style tail lights to LED lights
- Padded stalls and divider
- Aluminum top rack w/ ladder
- Ladder only
- Sulky rack on top w/ track
- Sulky rack on tail gate or door
- 4′ ramp w/ dutch doors and window in place of tall doors
- Tall doors w/ rubber bumper in place of ramp w/ dutch doors
- 4′ ramp over back doors
- Single ramp at front horse w/ top door and window in place of escape door
- Double ramp at front two horses w/ top door and window in place of escape door
- Extra height or extra width on back or side ramp
- 55″ side ramp (used on our head to head trailers)
- Installation of Ramp Spring
- 4′ ramp in place of combination gate – No Charge
- One pair of dutch doors w/ window above ramp
- One pair of tubing dutch doors (squared off)
- To delete back tack
- To add a chain across back
- Brush tray
- Rubber kick plates
- Floor mats – 6′ Wide
- Floor mats – 7′ Wide
- Floor mats – 8′ Wide
- Rubber dock bumper
- Rubber mats in place of carpet in dressing room
- Seal off saddle compartment with 2-doors and light (dressing room model)
- Saddle racks
- Swing out saddle rack in back tack
- Small Stainless Steel fold down step used going up into gooseneck
- Gore made aluminum fold down step for dressing room door
- Stainless Steel Nose on Gooseneck trailer (cost for the front sheet)
- 5′ tall sides
- Shim in sides
- 2″ Stripes Installed
- Tape Color Chart
- To go to: ST225/75R15 (8-Ply) in place of ST205/75R15 (6-Ply)
- To go to: LT235/85R16 (10-Ply) in place of ST225/75R15 (8-Ply)
- To go to: LT235/85R16 (14-Ply) in place of LT235/85R15 (10-Ply)
- To go to: 215/75R17.5 (16-Ply) in place of LT235/85R16 (10-Ply) Note: The 17.5 is aluminum wheel
- ST205/75R15 (6-Ply) = 1820 lbs. Ea. @ 50 PSI
- ST225/75R15 (8-Ply) = 2540 lbs. Ea @ 65 PSI
- LT235/85R16 (8-Ply) = 3200 lbs. Ea. @ 65 PSI
- LT235/85R16 (10-Ply) = 3040 lbs. Ea. @ 80 PSI
- LT235/85R16 (14-Ply) = 3750 lbs. Ea @ 110 PSI
- 215/75R17.5 (16-Ply) = 4805 lbs. Ea. @ 120 PSI
- Electric Over Hydraulic Brakes on Trailer **Must use the correct brake control on vehicle
- Aluminum top air scoop
- Butterfly Air Vent
- Straight across divider wall for a 6′, 7′ or 8′ wide trailer
- Slant divider wall for a 6′, 7′ or 8* wide trailer
- Above walls w/ 1″ tubing at top for air flow (4″ apart)
- Above walls to swing or to be removable
- Water tank
- 12-VOLT Water Pump Mounted
- Heavy Duty Marine Battery and Box Installed w/charger
- Aluminum battery box
- 15″, 5 or 6-Hole Aluminum Wheels (ln place of regular wheels)
- 16″, 6 or 8-Hole Aluminum Wheels (In place of regular wheels)
- 17.5 Alcoa 8-Hole Aluminum Wheels (In place of regular wheels)
- Small picture window (15″H x 22″W)
- (14″H x 48″W) or (14″H x 59″W) Bus window
- Drop down feed window w/ bars in back door in place of regular window
- Drop down feed window w/ bars at horses tail (in slant models) – in place of regular window
- Slats at horses head (no feed window) – **NO CHARGE** **NO CREDIT**
- To go from 6’ wide to 79″ wide **Total length including gooseneck**
- To go from 79″ wide to 84″ wide **Total length including gooseneck**
- To go from 84″ wide to 93″ wide **Total length including gooseneck**
- 120 V wiring w/ one outlet
- Extra 120 outlets (Inside)
- Outside Ground Fault Receptacle
- Pre-wire for air